|
The PC125 portable crimper with its open design, removable pusher and easy to use,
spring loaded die set, is designed for higher production volume and repetitive use.
Crimp diameter is set and controlled with an easy to read micrometer. The PC125
is packaged for shop service and includes the crimper and 1 HP, 110V electric pump
on a common base, compression ring, pressure plate, magnetized die ring pusher,
stop/start remote pendant switch, metric micrometer, adjustable coupling stop and
adjustable retraction stop.
|
• Easy to read, fully adjustable metric micrometer allows precise setting
of crimp diameters to an accuracy of +/-.1mm
• Open design with vertical feed for good operator visibility.
• Removable pusher and spring loaded die set for easy loading
• Magnetized pusher to attach compression ring for repetitive use
• 35 ton cylinder
• Automatic shut off for precise crimps
• Adjustable Retraction Stop limits ram retractions for quick repetitive crimps
• Adjustable coupling stop for accurate, repetitive positioning of the assembly
inside the dies
• Two piece, “slide in” die design for easy installation.
• Common base for bench mounting
• Color coded die sets to speed die selection and set-up
• 1 HP, 110V pump
• Pneumatic activation (no electric wires) of remote pendant switch
|
|
• 1/4" through 1 1/4" ID, 2 wire braid hose and 1" ID 4-spiral hose with all
coupling end styles including most bent tubes.
|
|
• 1 HP, 110V AC, single phase 50-60 Hz, Electric Pump (PC125/150-E1PUMP) with
pneumatic stop/start pendant switch
|
Oil Capacity: 1 gallon
Mounting:Crimper and pump installed on plate
Dimensions: 20" deep x 11" wide x 19" tall
Weight: 125 lbs
|
|
|
PC 125 Die Set
|
|
Part Number |
ID |
Part Number |
ID |
|
PC125-8.5Black |
8.5mm |
PC125-27Brown |
27mm |
|
PC125-12Black |
12mm |
PC125-31Silver |
31mm |
|
PC125-14Red |
14mm |
PC125-34Purple |
34mm |
|
PC125-16Blue |
16mm |
PC125-41Orange |
41mm |
|
PC125-19Green |
19mm |
PC125-45Black |
45mm |
|
PC125-23Yellow |
23mm |
PC125-50Black |
50mm |
|
• PC 125-Skit includes the PC125 crimper and 5 die sets including 16mm, 19mm,
23mm, 31mm, 41mm dies for 1/4" to 1" 1-braid and 2-braid hose.
• PC125-Shelf–Black Die Storage Shelf Unit 13" deep x 12.5"
wide x 15" high, 12 lbs
|
|
Metric
Micrometer
|
PC125 Die
Storage Shelf
|
|
• PC125-Pusher–Die Ring Pusher with magnets
• PC125-Cring–Compression Ring
• PC125-Pplate–Pressure Plate
• PC125-Cstop–Adjustable Coupling Stop
• PC125-Die Screw–Die Screw
• PC125-Die Spring–Die Spring
• PC125/150-Switch–Pneumatic Start/Stop Pendant Switch for 1 HP Pump
• PC125/150-E1Pump–1 HP 110V Electric Pump
• PC900-Grease-3 oz.–High Pressure grease in a 3 oz. tube
• PC900-Grease-1 lb.–High Pressure grease in a 1 lb. can
• PC900-AerosolLube–High Pressure grease in an aerosol can
|
|
PC125
Coupling Stop
|
PC 125
Retraction Stop
|
PC125
Magnetic Pusher
|
|