|
Carried to the job site, using a handle and support stand, the PC125M is ideal for
portable crimping requirements. Whether carried on-site, or used in a vehicle, or
even stationary at the shop, the PC125M is designed as a low volume crimper or for
occasional use. Crimp diameter is set and controlled with an easy to read micrometer.
This affordable crimper is packaged in component parts to fit the need of the user.
The PC125M has three power options. No electrical power source required if using
the hand or pneumatic pump option. A 1/2 HP, 110V electric pump is available as
well. The PC125M includes die ring pusher, stand, compression ring, pressure plate
and a metric micrometer. Pumps and dies are purchased separately.
|
• Easy to read, fully adjustable metric micrometer allows precise setting
of crimp diameters to an accuracy of +/- .1mm.
• Open design with vertical feed for good operator visibility.
• Removable pusher and spring loaded die set for easy loading.
• 35 ton cylinder
• Two piece, “slide in” die design for easy installation
• Lightweight for portable field use
• Color coded die sets to speed die selection and set-up
• Attach hand, air or electric pump
|
|
• 1/4" through 1 1/4" ID, 2 wire braid hose and 1" ID 4-spiral
hose with all coupling end styles including most bent tubes.
|
• Optional Two Stage Hand Pump, 10,000 psi (PC125-HPump)
• Optional Air/Hydraulic Pump, 10,000 psi using 80 psi air (PC125-PPump)
• Optional 1/2 HP 110V AC, single phase, 50-60 Hz Electric Pump (PC125M-.5EPump)
with foot switch
|
Oil Capacity: 1 gallon
Mounting: Stand included
Dimensions: 14" deep x 11" wide x 23.5" high
Weight: 45 lbs
|
|
|
PC 125 Die Set
|
|
Part Number |
ID |
Part Number |
ID |
|
PC125-8.5Black |
8.5mm |
PC125-27Brown |
27mm |
|
PC125-12Black |
12mm |
PC125-31Silver |
31mm |
|
PC125-14Red |
14mm |
PC125-34Purple |
34mm |
|
PC125-16Blue |
16mm |
PC125-41Orange |
41mm |
|
PC125-19Green |
19mm |
PC125-45Black |
45mm |
|
PC125-23Yellow |
23mm |
PC125-50Black |
50mm |
|
• PC125M-Skit includes the PC125M crimper and 5 die sets including 16mm, 19mm,
23mm, 31mm, 41mm dies for 1/4" to 1" 1-braid and 2-braid hose.
• PC125-Shelf–Black Die Storage Shelf Unit 13” deep x 12.5"
wide x 15" high, 12 lbs
• PC125-Hpump–Two Stage Hand Pump
• PC125-Ppump–Air/Hydraulic Pump
• PC125M-.5EPump–1/2 HP, 110V Electric Pump
|
|
Electric Pump
(PC125M-.5EPump)
|
Metric
Micrometer
|
PC125 Die
Storage Shelf
|
• PC125M-Pusher–Die Ring Pusher
• PC125-Cring–Compression Ring
• PC125-Pplate–Pressure Plate
• PC125-Die Screw–Die Screw
• PC125-Die Spring–Die Spring
• PC125-Hpump–Optional Two Stage Hand Pump
• PC125-Ppump–Optional Air/Hydraulic Pump
• PC125M-.5EPump–Optional 1/2 HP, 110V Electric Pump
• PC900-Grease-3 oz.–High Pressure grease in a 3 oz. tube
• PC900-Grease-1lb.–High Pressure grease in a 1 lb. can
• PC900-Aerosol Lube–High Pressure grease in an aerosol can
|
|
Hand Pump
(PC125 HPump)
|
Air/Hydraulic Pump
(PC125-PPump)
|
|
|