|
The PC400 is a high volume, high capacity, stationary crimper, utilizing microprocessor
control for the fastest, most accurate crimping system available. Crimp settings,
dwell time, pre-set start positions and auto/manual operation are all easily set
with electronic controls. This production crimper is a quick and easy way to make
factory quality hose assemblies. The standard package is the PC400 crimper which
includes a 7.5 HP, 230V/3 phase pump and foot pedal. The optional PC400-1 crimper
includes a 5.0 HP, 230V/single phase pump and foot pedal.
|
• Hose feed is horizontal from either front or rear.
• Accurate Electronic PLC Crimp Diameter Adjustment
• Manual or automatic mode
• Maximum Die Opening: Die Closed Diameter + 60mm
• 265 ton cylinder
• Automatic shut off for precise crimps
• Power return stroke and return limit control
• Rapid retraction of die fingers through hydraulic system
• Die Sets easily changed using hand tool
• Accommodates bent tube/elbow couplings with the ability of installing 2",
90 degree fittings on both ends.
|
|
• 1/4" through 2" ID, 2 wire braid hose, and 2" 6 spiral hose,
and 4” industrial hose with all coupling end styles including most bent tubes.
|
• 7.5 HP, 230V AC, 3 phase, 60 Hz PC400
• 5 HP, 220V AC, Single Phase, 60 Hz PC400-1
|
Oil Capacity: 8 U.S. gallon
Mounting: Bench or cabinet
Dimensions: 18.5" deep x 27.5" wide x 31.5" high (without die cabinet)
Weight: 573 lbs (excluding cabinet)
|
|
|
PC 200 Die Set
( For hydraulic hose assemblies)
|
|
Part Number |
ID |
Part Number |
ID |
|
PC200-8.5 |
8.5mm |
PC200-34 |
34mm |
|
PC200-12 |
12mm |
PC200-41 |
41mm |
|
PC200-14 |
14mm |
PC200-45 |
45mm |
|
PC200-16 |
16mm |
PC200-50 |
50mm |
|
PC200-19 |
19mm |
PC200-56 |
56mm |
|
PC200-23 |
23mm |
PC200-62 |
62mm |
|
PC200-27 |
27mm |
PC200-69 |
69mm |
|
PC200-31 |
31mm |
PC200-74 |
74mm |
|
|
|
PC200-78 |
78mm |
|
|
PC400 Die Set (For industrial hose assemblies) |
|
Part Number |
ID |
|
PC400-86-125L |
86 mm |
|
PC400-90-125L |
90 mm |
|
PC400-114-125L |
114 mm |
|
PC400-118-125L |
118 mm |
|
• PC400 Skit includes the PC400 crimper and 10 die sets including 16mm, 19mm,
23mm, 31mm, 41mm, 50mm, 56mm, 62mm, 69mm, 78mm dies.
• PC400-1Skit includes the PC400-1 crimper and 10 die sets including 16mm,
19mm, 23mm, 31mm, 41mm, 50mm, 56mm, 62mm, 69mm, 78mm.
• PC200-Rack–Black Die Cabinet (used with PC400) 20" deep x 30"
wide x 29" high
• PC200-MBS–Manual Back Stop (used with PC400)
• PC200-EBS–Electric Back Stop (used with PC400)
|
|
Foot
Switch
|
Control
Panel
|
• PC900-Grease-1lb–High Pressure grease in a 1 lb. can
• PC900-AerosolLube–High Pressure grease in an aerosol can
|
|
Die
Cabinet
|
|
|